Saving Measured Values In A File; Outputting The Results Of Sampling As A File; Exporting The Results Of Sampling - Omron ZW-C1*T User Manual

5-2 Saving measured values in a file

Data sampled with the trend monitor can be exported and imported as a CSV format file.

Outputting the results of sampling as a file

Sampled measured values can be saved as a CSV format file.
A file is prepared each time the trigger condition is met.
1
Check the checkbox for the save destination.
2
Set the save condition.
Item Setting item
File settings Logging mode
Save in
File prefix
Samples per file 100 to 10000000
Max sampling
time

Exporting the results of sampling

Sampled measured values can be exported as a CSV format file.
Item
LoggingMode
SamplePeriod
TriggerStart
TriggerStartType
ZW User's Manual
Range
Single
Continuous


0:0:0 to 24:59:59
Output items
Single
Continuous
1 to 9999
True
False
IO
DataSlope
DataWindowIn
DataWindowOut
DataSize
Description
When the trigger end condition is met, sampling stops.
Sampling does not stop until you press the End icon. Each
time the trigger start condition is met, a new file is prepared
and saved.
This is the folder to save the files in.
This is the prefix for the name of the file saved.
This is the number of samples saved in one file. If more
samples than this set number are taken, a new file is
prepared.
This indicates the upper limit on the interval for saving a file.
Description
Indicates the sampling mode.
Single or continuous
Indicates the sampling interval.
Indicates whether the trigger start condition is "Enabled" or
"Disabled".
Indicates the trigger start condition.
IO: I/O result
DataSlope: Data slope
DataWindowIn: Data window (in)
DataWindowOut: Data window (out)

Saving measured values in a file

121