Omron ZW-C1*T User Manual page 239

Setting the Average Filter
Setting the Average Filter p.91
As an example, here is an explanation of the procedure for selecting the "128" average count setting.
Operating procedure
Steps Key operation
1 to 4 For moving to "FILTER", see steps 1 to 4 on p.236.
5
6
7
ZW User's Manual
Display Description
Select "AVE" as the filter type.
Press the
Select the average count.
The current setting value is displayed on the sub-display.
Press
In this example, select "128" and press the
Press the
/ keys to select "AVE" and press the
/ key to enter editing mode and the sub-display blinks.
key for two seconds to enter the RUN mode.
Setting the Output Conditions
key.
key.
237