Direct - Omron ZW-C1*T User Manual

Direct

Set the threshold value by entering the numerical values directly.
As an example, here is an explanation of the procedure for setting a HIGH threshold value by entering "40.000"
directly.
Operating procedure
Steps Key operation
1 to 4 For moving to JUDGE, see steps 1 to 4 on p.258.
5
6
7
8
ZW User's Manual
Display Description
Press the
key.
Select HIGH THRESHHOLD as the threshold value type.
Press the
key.
Set "40.000" as the HIGH threshold value.
The current measured value is displayed on the main display and the
current set threshold value is displayed on the sub-display. (At this
time, the THRESHOLD-H indicator lights up.)
Press
blinks.
To edit numerical values, use the
Enter "40.000" and press the
Press and hold the
mode.
/ key to select DIRECT, then press the
/ key to select H.JUDGE, then press the
key to enter the editing mode, and the sub-display
/ /
key.
key for two seconds to enter the RUN
Setting Threshold Value
/ keys.
259