Table of Contents
Advertisement
Explorer pane
Edit pane
Task Settings window : [Hold]
1
Set the hold mode.
Setting the Hold Mode p.94
2
Select the trigger method from [Trigger
settings] - [Trigger method].
3
Enter [Trigger level] and [Trigger hysteresis]
when [Selfup trigger] or [Selfdown trigger]
are selected at [Trigger method].
Important
Set "Trigger hysteresis" according to the fluctuation of the measured value near the trigger level. Hysteresis is applied
simultaneously with start of measurement to prevent chattering of the TIMING input.
Note
The trigger can also be set by the operating keys on the Sensor Controller.
Setting Triggers p.245
98
Setting the Output Conditions
: [Bank] | [(Bank Data Name)] (double click)
: [Task Settings] icon (
)
ZW User's Manual
Advertisement
Table of Contents
Troubleshooting
