Omron ZW-C1*T User Manual page 236

Steps Key operation
Sets the surface peak hold for TASK1 and the surface average hold for TASK2.
3
Setting Hold p.94
4
5
6
7
8
9
10
11
12
13
234
Setting Measurement Items
Display Description
Press the
key.
Press the
Press the
Select "PARAM.K" for the parameter type.
Press the
key.
Set the parameter to "0".
The current setting value is displayed on the sub-display.
Press
blinks.
To edit numerical values, use the
Input "0", then press the
The decimal point is displayed.
Press the
Determine the decimal point and then press the
Press the
Select "PARAMm" for the parameter type.
Press the
Set the parameter to "1".
The current setting value is displayed on the sub-display.
Press
blinks.
To edit numerical values, use the
Input "1", then press the
Press the
/ keys to select "TASK3" and press the
/ keys to select "ITEM" and press the
/ keys to select "CALC" and press the
/ keys to select "PARAM.K" and press the
key to enter the editing mode, and the sub-display
/
key.
/ key to move the decimal point.
key to return to the previous menu.
/ keys to select "PARAM.M" and press the
key.
key to enter the editing mode, and the sub-display
/
key.
key to return to the previous menu.
key.
key.
/ / keys.
key.
/ / keys.
ZW User's Manual