Omron ZW-C1*T User Manual page 274

Setting Operation at Judgment Output
Setting Operation at Judgment Output p.144
As an example, the following explains the procedure for setting the timer type to "1 SHOT" and the timer
duration to "10ms".
Operating procedure
Steps Key operation
1 to 3 For moving to "JUDGE", see steps 1 to 3 in p.271.
4
5
6
7
272
Connecting Parallel I/O
Display Description
Select the judgment output setting item.
HYS: Hysteresis width
TIMER: Timer mode
In this example, press the
key.
Select the timer mode.
OFF: Not set
OFF.DLY: Off Delay
ONDLY: On Delay
1SHOT: One Shot
Select "1SHOT" as the judgment output type.
The current setting value is displayed on the sub-display.
Press the
blinks.
Select "1SHOT" and press the
Set the timer duration.
The current setting value is displayed on the sub-display.
Press
To edit numerical values, use the
In this example, input "10", then press the
Press and hold the
/ keys, select "TIMER" and press the
/ keys to enter the editing mode, and the sub-display
key.
key to enter the editing mode, and the sub-display blinks.
/ /
key for two seconds to enter the RUN mode.
/ keys.
key.
ZW User's Manual