Powercam Primary Camera Cable - Polycom HDX 9006 Integrator's Manual

Integrator's Reference Manual for Polycom HDX Systems

PowerCam Primary Camera Cable

This cable connects the Polycom HDX system video input 1 to a Polycom PowerCam camera up to 10 ft
away when used with the
mini-DIN and DB-15. The maximum approved length for this cable is 10 ft (3 m).
Length
9 ft 10 in (3 m)
200mm / 7.87"
P3
4Pin Mini Din
Male
40mm
(1.57")
P1
15 Pin D-sub
Male
Polycom, Inc.
HDCI PowerCam Plus Adapter Cable
Part Number
1457-50338-002
Molded PVC strain relief
4-40 Jack screw
Drawings and part numbers are provided for reference only. Polycom claims no
responsibility or liability for the quality, performance, or reliability of cables based on
these reference drawings, other than cables provided by Polycom. Contact your
Polycom distributor or Polycom Custom/Vertical Products to order cables that meet
the appropriate manufacturing tolerances, quality, and performance parameters for
your application.
on page 59. It is 8-pin mini-DIN to 4-pin
RoHS Compliant
Yes
3 Meters +/- 50.80mm
P1 15 Pin D Connector
Pin # Signal Name
1-4 N/C
5 PGND
6 +12V
7 SW-RX/SN-TX
8 IR-SIGNAL
9-11 N/C
12 P GND
13 +12V
14 SW-TX/SN-RX
15 IR RETURN
SHIELD
P3 4 Pin Mini Din
1 RTN
2 RTN
3 Luma
4 Chroma
SHIELD
P2
Pan Int'l 73069-008-T06
8 Pin Mini Din
Male
P2 8 Pin mini Din
Wire Type Pin # Signal Name
22AWG wire 3 DGND
22 AWG wire 7 +12V
30 AWG wire 2 SW-RX/SN-TX
30 AWG wire 4 IR_SIGNAL
22 AWG wire 3 DGND
22 AWG wire 7 +12V
30 AWG wire 1 SW-TX/SN-RX
30 AWG wire 3 DGND
DRAIN wire SHIELD
Coax Shield 5
GVID
Coax Shield 5
GVID
Micro Coax 6
Luma
Micro Coax 8
Chroma
DRAIN wire SHIELD
Cables
68