Table of Contents
Advertisement
Integrator's Reference Manual for Polycom HDX Systems
pricsu
Sets or gets the PRI CSU mode for a T1 interface.
Syntax
pricsu <get|internal|external>
Parameter
get
internal
external
Feedback Examples
● pricsu internal
returns
pricsu internal
● pricsu external
returns
pricsu external
● pricsu get
returns
pricsu external
Comments
By default, the T1 PRI network interface module is set for internal CSU mode.
See Also
The PRI line buildout for a T1 interface is set using the
Polycom, Inc.
Description
Returns the current setting.
Sets the internal CSU mode. This is the default.
Sets the external CSU mode. When selected, you must
specify the PRI line buildout.
prilinebuildout
command on page 386.
System Commands
383
Advertisement
Table of Contents
