Table of Contents
Advertisement
Integrator's Reference Manual for Polycom HDX Systems
sourceman.camera[1].autowhitebalancegainr,"37"
sourceman.camera[1].backlightcomp,"False"
sourceman.camera[1].brightness,"11"
sourceman.camera[1].contrast,"13"
sourceman.camera[1].name,"Main"
sourceman.camera[1].role,"People"
sourceman.camera[1].saturation,"6"
sourceman.camera[1].sharpness,"3"
sourceman.camera[1].videoquality,"Sharpness"
sourceman.camera[1].whitebalancemode,"atw"
video.monitor[1].Resolution,"1920x1080p 60Hz"
video.monitor[2].Resolution,"1920x1080p 60Hz"
exportprofile done
Comments
exportprofile done indicates that all the profile data has been exported.
When the system uses the Maximum security profile, this command is available only to Administrators.
Do not use exportdirectory to interpret the data that is returned. Simply store and use the data as input
to the importdirectory command or import directory utility in the web interface. The format of the
exported directory data might change in future software releases and any application attempting to interpret
the data could find its ability to do so compromised in later releases of Polycom HDX software.
Exporting a directory on one system model and importing the directory on another model is not supported.
Attempts to export and import directory information between different systems might also fail. The message
importdirectory failed indicates that the system was not able to import the information.
When the system uses the Maximum security profile, this command is available only to Administrators.
When importing directory data back into the system, use the data in its entirety (not edited in any form).
There is information that is used by the system to determine what type (XML or CSV) of data is being
imported.
Additional Usage Notes:
● Polycom HDX systems running software version 2.6 or later can import directory data exported from
systems running 2.6 and earlier versions.
● Polycom HDX systems running software versions earlier than 2.6 cannot import directory data
exported by systems running software version 2.6 or later.
See Also
See the
importprofile
command on page 302.
Polycom, Inc.
System Commands
239
Advertisement
Table of Contents
