Table of Contents
Advertisement
Integrator's Reference Manual for Polycom HDX Systems
vcbutton
Controls a content video source. It can also register or unregister the API session to receive notification of
content events.
Syntax
vcbutton play {2..6}
vcbutton <get|stop|register|unregister>
vcbutton map <get|{2..6}>
vcbutton source get
Parameter
play
{2..6}
get
stop
register
unregister
map get
map {2..6}
source get
Feedback Examples
If not registered for notifications:
Polycom, Inc.
Description
Starts sending the content from the specified content
video source. If no content video source is specified,
starts sending content from the default content video
source. Starts content from any content video source
without the need to change source mapping and without
needing to stop the currently playing content video
source. Fails and does not stop the current content
video source if the specified content video source is not
valid. Stops the current content video source if the
specified content video source is valid but is currently
unavailable.
Specifies a content video source.
Returns the current setting (play or stop).
Stops sending content from the content video source
that is currently playing.
Registers the API session to receive notifications about
content events.
Unregisters the API session to receive notifications
about content events.
Gets the content video source currently specified for
control.
Specifies the content video source to control.
Note: This parameter is only necessary if no video
source was specified when using the vcbutton play
command.
Gets the content video source that is currently playing.
System Commands
554
Advertisement
Table of Contents
