Table of Contents
Advertisement
Integrator's Reference Manual for Polycom HDX Systems
getconfiguredipaddress
Retrieves the currently configured IPv4 address from the system.
Syntax
getconfiguredipaddress
Feedback Examples
● getconfiguredipaddress
returns
getconfiguredipaddress 1.2.3.4
Comments
getconfiguredipaddress returns the currently configured IPv4 address of the system regardless of the
status of the LAN connection. This differs from the ipaddress get command, which returns the current
IP address of the system if it has an active LAN connection, else it returns 0.0.0.0.
The definition of "currently configured IPv4 address" depends on the IPv4 address configuration settings:
● If the Connect to My LAN setting is disabled, then 0.0.0.0 is returned. Otherwise, the definition
depends on the IP Address (IPv4) setting.
● If the IP address is set manually the configured IP address is returned, regardless of whether the LAN
connection is currently active.
● If the IP address is obtained automatically, the currently-assigned address is returned, or 0.0.0.0 is
returned if there is no active connection.
Polycom, Inc.
System Commands
273
Advertisement
Table of Contents
