Table of Contents
Advertisement
Integrator's Reference Manual for Polycom HDX Systems
priswitch
Sets or gets the PRI switch.
Syntax
priswitch get
priswitch set <att5ess|att4ess|norteldms|ni2>
priswitch set <net5/ctr4|nttins-1500|ts-038>
Parameter
get
set
att5ess|att4ess|
norteldms|ni2|
net5/ctr4|
nttins-1500|ts-038
Feedback Examples
● priswitch set att5ess
returns
priswitch att5ess
● priswitch get
returns
priswitch att5ess
Comments
If more than one switch protocol is supported, you must find out from your telephone service provider which
protocol to select. NET5/CTR4 is the default. It is the standard ETSI protocol derived from ITU Q.931. If you
change the country settings, a new set of PRI switch protocols is loaded.
Polycom, Inc.
Description
Returns the current switch protocol.
Sets the PRI switch. One of the switch protocol
parameters is required.
Switch protocol values.
For E1, net5/ctr4 is the default. net5/ctr4 is the
standard ETSI protocol derived from ITU Q.931.
For T1, net5/ctr4 is also provided for certain Asian
countries, such as Japan, Hong Kong, and Taiwan.
System Commands
390
Advertisement
Table of Contents
