Hostname - Polycom HDX 9006 Integrator's Manual

Integrator's Reference Manual for Polycom HDX Systems

hostname

Sets or gets the LAN host name, which is assigned to the system for TCP/IP configuration and can be used
in place of an IP address when dialing IP calls.
Syntax
hostname get
hostname set ["hostname"]
Parameter
get
set
"hostname"
Feedback Examples
● hostname set
returns
hostname ADMIN
● hostname set "My"
returns
hostname My
● hostname get
returns
hostname My
Comments
A LAN host name is required; it cannot be deleted or left blank. After making a change, you must restart the
system for the setting to take effect.
Polycom, Inc.
Description
Returns the current setting.
Sets the system's LAN host name when followed by the
"hostname" parameter. If "hostname" is omitted, the
system automatically sets it to Admin.
Character string specifying the LAN host name of the
system. The LAN host name follows these format rules:
Starts with a letter (A-a to Z-z). It is not case sensitive.
Ends with a letter (A-a to Z-z) or a number (0 to 9).
May include letters, numbers, and a hyphen.
May not be longer than 63 characters.
Note: The LAN host name is initialized during the setup
wizard sequence. The LAN host name is the same as
the system name, if the system name conforms to the
rules above. If the system name does not conform to
these rules, the invalid characters are removed from the
system name. If the resulting string is empty, the default
LAN host name is Admin.
System Commands
297