Table of Contents
Advertisement
Integrator's Reference Manual for Polycom HDX Systems
st
Sets or gets the st serial interface control signal (send timing: clock) setting. This command is only
applicable if you have a V.35 network interface connected to your system.
Syntax
st <get|normal|inverted>
Parameter
get
normal
inverted
Feedback Examples
● st normal
returns
st normal
● st inverted
returns
st inverted
● st get
returns
st inverted
Comments
The default setting is "normal".
Polycom, Inc.
Description
Returns the current setting.
Sets the signal to normal (falling edge sends data).
Sets the signal to inverted (rising edge sends data).
System Commands
430
Advertisement
Table of Contents
