Table of Contents
Advertisement
Integrator's Reference Manual for Polycom HDX Systems
echoreply
Sets or gets the system's ability to send an Echo Reply message in response to an Echo Request message
sent to an IPv6 or IPv4 multicast/anycast address.
Syntax
echoreply <get|yes|no>
Parameter
get
yes
no
Feedback Examples
● echoreply get
returns
echoreply yes
● echoreply no
returns
echoreply no
Comments
This setting is applicable for both IPv4 and IPv6 configurations. The number of responses may be
traffic-conditioned to limit the effect of a denial of service attack.
After making a change, you must restart the system for the setting to take effect.
Polycom, Inc.
Description
Returns the current setting.
Enables the echo reply option.
Disables the echo reply option.
System Commands
225
Advertisement
Table of Contents
