Screen - Polycom HDX 9006 Integrator's Manual

Integrator's Reference Manual for Polycom HDX Systems

screen

Returns the name of the current user interface screen on the system, registers or unregisters for screen
changes, or goes to a specific user interface screen.
Syntax
screen
screen register get
screen [register|unregister]
screen "screen_name"
Parameter
screen
register
get
unregister
"screen_name"
Feedback Examples
● screen
returns
screen: adminsettings
if the Admin Settings screen is currently displayed in the user interface
● screen register
returns
screen registered
● screen monitors
returns
screen: monitors
and displays the Monitors screen in the user interface
Polycom, Inc.
Description
Returns the name of the current user interface screen if
not followed by other parameters.
Registers for user interface screen changes. In register
mode, the name of every screen accessed is listed.
Returns the registration state for screen change events
when followed by the get parameter.
Unregisters from user interface screen changes.
Changes the user interface to display the specified
screen. The supported screens depend on the system
configuration. To determine the name to use for a
specific screen, navigate to that screen in the user
interface and send the screen command.
System Commands
406