Polycom HDX 9006 Integrator's Manual page 271

Integrator's Reference Manual for Polycom HDX Systems
Parameter
type
phone_num
h323_spd
h323_num
h323_ext
sip_spd
sip_num
xmpp_addr
isdn_spd
isdn_num
isdn_ext
Polycom, Inc.
Description
The type of global address book entry. Possible values
are:
video, multicodec, phone.
The phone number for an address book entry. In LDAP,
phone numbers are associated with a person/room
(aka, entry) rather than with each endpoint belonging to
that person/room.
The preferred speed for an H.323 call to this entry. If no
speed is associated with the entry, then the value of the
configuration variable "globaladdrmaxh323" is returned.
The default is 384.
For LDAP entries Polycom HDX systems currently do
not use this field. It is always blank.
If an LDAP entry has a value for the H.350.1
h323Identityh323-ID attribute (H.323 alias), it will
be returned as the h323_ext. If there is no
h323Identityh323-ID, then if there is a value for the
H.350.1 h323IdentitydialedDigits attribute
(E.164 number), it will be returned.
The preferred speed for a SIP call to this entry. If no
speed is associated with the entry, then this is the same
as the h323_spd.
SIP address. For LDAP this is the H.350.4
SIPIdentitySIPURI attribute.
XMPP address, also known as the Jabber ID (JID). For
LDAP this is the H.350.7 XmppIdentityURI attribute.
The preferred speed for an H.320 call to this entry. If no
speed is associated with the entry, then the value of the
configuration variable "globaladdrmaxh320" is returned.
The default is 384.
ISDN number for H.320 calls. For LDAP this is a
concatenation of the H.350.3 h320IdentityCC
(Country Code), h320IdentityNDC (National
Destination Code), and h320IdentitySN (Subscriber
Number) attributes.
For LDAP this is the H.350.3
h320IdentityExtension attribute. It is the extension
of terminal required to dial after initial PSTN address is
connected. It could also be an H.323 extension to be
used for gateway dialing (e.g.,
h323:user@gatekeeper.foo.com).
System Commands
253