Table of Contents
Advertisement
Integrator's Reference Manual for Polycom HDX Systems
prilinebuildout
Sets or gets the PRI line buildout for a T1 interface.
Syntax
prilinebuildout get
prilinebuildout set <0|-7.5|-15|-22.5>
prilinebuildout set <0-133|134-266|267-399|400-533|534-665>
Parameter
get
set
0|-7.5|-15|-22.5
0-133|134-266|
267-399|400-533|
534-665
Feedback Examples
● prilinebuildout set -7.5
returns
prilinebuildout -7.5
● prilinebuildout get
returns
prilinebuildout -7.5
Comments
If you are using an internal CSU, enter the output attenuation in dB. If you are using an external CSU, enter
the output attenuation in feet.
See Also
The PRI CSU mode for a T1 interface is set using the
Polycom, Inc.
Description
Returns the current setting.
Sets the PRI line buildout. It requires an output
"attenuation in dB" or an "attenuation in
feet".
Output attenuation values in dB. For internal CSUs.
Output attenuation values in feet. For external CSUs.
pricsu
command on page
System Commands
383
386
Advertisement
Table of Contents
