Table of Contents
Advertisement
Integrator's Reference Manual for Polycom HDX Systems
isdnareacode
Sets or gets the ISDN area code or STD code associated with the area where the system is used. This
command is only applicable if you have an ISDN network interface connected to your system.
Syntax
isdnareacode get
isdnareacode set ["area code"]
Parameter
get
set
"area code"
Feedback Examples
● isdnareacode set 700
returns
isdnareacode 700
● isdnareacode get
returns
isdnareacode 700
Polycom, Inc.
Description
Returns the area code information.
Sets the ISDN area code when followed by the "area
code" parameter. To erase the current setting, omit
"area code".
Numeric value.
System Commands
315
Advertisement
Table of Contents
