Table of Contents
Advertisement
Integrator's Reference Manual for Polycom HDX Systems
mtusize
Sets or gets the MTU size. The mtumode and mtusize commands allow you to change the Maximum
Transmission Unit (MTU) size, to adjust for the best interoperability with the host network. Set mtumode to
specify, then use mtusize to specify a value. If mtumode is set to default, the system automatically
sets the MTU value to 1260.
Syntax
mtusize <get|660|780|900|1020|1140|1260|1500>
Parameter
get
660|780|900|1020|
1140|1260|1500
Feedback Examples
● mtumode specify
returns
mtumode specify
● mtusize 660
returns
mtusize 660
● mtusize 1140
returns
mtusize 1140
● mtusize get
returns
mtusize 1140
See Also
See also the related
mtumode
Polycom, Inc.
Description
Returns the current setting.
Sets the value of the Maximum Transmission Unit size.
command on page 351.
System Commands
352
Advertisement
Table of Contents
