Integrator's Reference Manual for Polycom HDX Systems
pridialchannels
Sets or gets the number of PRI channels to dial in parallel. This command is only applicable if you have a
PRI network interface connected to your system.
Syntax
pridialchannels get
pridialchannels set {1..n}
Parameter
set
get
{1..n}
Feedback Examples
● pridialchannels set 3
returns
pridialchannels 3
● pridialchannels get
returns
pridialchannels 3
Comments
By default, ISDN channels are dialed three at a time. On PRI systems, you can choose the number of
channels to dial in parallel.
Polycom, Inc.
Description
Sets the number of PRI channels to be dialed in parallel
when followed by a parameter from {1..n}. To erase
the current setting, omit the parameter.
Returns the current number of channels dialed in
parallel.
Range of numbers of PRI channels that can be dialed in
parallel. For PRI T1, the range is 1..12. For PRI E1,
the range is 1..15.
System Commands
384