Table of Contents
Advertisement
Integrator's Reference Manual for Polycom HDX Systems
ldapbinddn
Sets or gets the bind DN for LDAP Simple Authentication.
Syntax
ldapbinddn get
ldapbinddn set ["bind dn"]
Parameter
get
set
"bind dn"
Feedback Examples
● ldapbinddn get
returns
ldapbinddn cn=plcm admin1,ou=plcmsupport,ou=plcmhelp,
dc=hardware,dc=domain,dc=polycom,dc=com
where:
cn=common name
ou=organizational unit
dc=domain component
● ldapbinddn set cn=plcm admin2,ou=plcmaccounts,ou=plcmservice,
dc=hardware,dc=domain,dc=polycom,dc=com
returns
ldapbinddn cn=plcm admin2,ou=plcmaccounts,ou=plcmservice,
dc=hardware,dc=domain,dc=polycom,dc=com
where:
cn=common name
ou=organizational unit
dc=domain component
Polycom, Inc.
Description
Returns the current setting.
Sets the bind DN for LDAP Simple Authentication. To
erase the current setting, omit the "bind dn"
parameter.
Note: This parameter does not change the setting on the
server. Instead, this parameter changes how the
Polycom system recognizes the server.
Specifies the bind DN of an LDAP server.
Valid characters include:
Unicode (ISO-10646) characters, including IA5/ASCII
characters and extended characters such as é, Ø,
and å.
System Commands
326
Advertisement
Table of Contents
