Integrator's Reference Manual for Polycom HDX Systems
ldappassword
Sets the password for Simple or NT LAN Manager (NTLM) authentication of an LDAP server.
Syntax
ldappassword set <ntlm|basic> ["password"]
Parameter
set
ntlm
basic
"password"
Feedback Examples
● ldappassword set ntlm P!cmp@s5wd
returns
ldappassword NTLM P!cmp@s5wd
● ldappassword set basic P0!yc0mp@s5
returns
ldappassword BASIC P0!yc0mp@s5
Polycom, Inc.
Description
Sets the password for Simple or NTLM authentication of
an LDAP server. To erase the current setting, omit the
"password" parameter.
Note: This parameter does not change the setting on the
server. Instead, this parameter changes how the
Polycom system recognizes the server.
Specifies setting the password for NTLM authentication
of an LDAP server.
Specifies setting the password for Simple authentication
of an LDAP server.
Specifies the password for Simple or NTLM
authentication of an LDAP server.
Valid characters include:
Unicode (ISO-10646) characters, including IA5/ASCII
characters and extended characters such as é, Ø,
and å.
Note: The server administrator may specify additional
restrictions for password creation.
System Commands
329