Ipv6Sitelocal - Polycom HDX 9006 Integrator's Manual

Integrator's Reference Manual for Polycom HDX Systems

ipv6sitelocal

Sets or gets the IPv6 site local address.
Syntax
ipv6sitelocal get
ipv6sitelocal set "ipv6 site local address"
Parameter
get
set
ipv6 site local address
Feedback Examples
● ipv6sitelocal get
returns
ipv6sitelocal fed0:0:140:1:2e0:dbff:fe08:a03a/64
● ipv6sitelocal set fed0:0:140:1:2e0:dbff:fe08:a03a/64
returns
ipv6sitelocal fed0:0:140:1:2e0:dbff:fe08:a03a/64
Comments
After making a change, you must restart the system for the setting to take effect. This setting can be
changed only when ipv6addrmode is set to manual.
See Also
See the ipv6addrmode
Polycom, Inc.
Description
Returns the current setting.
Sets the IPv6 site local address.
The local IPv6 site local address.
command on page 309.
System Commands
313