Integrator's Reference Manual for Polycom HDX Systems
dcd
Sets the configuration for the DCD serial interface control signal (data carrier detect). This command is only
applicable if you have a V.35 network interface connected to your system.
Syntax
dcd <normal|inverted>
Parameter
normal
inverted
Feedback Examples
● dcd normal
returns
dcd normal
● dcd inverted
returns
dcd inverted
Comments
The default setting for this signal is "normal".
Polycom, Inc.
Description
Sets the signal to normal (high voltage is logic 1).
Sets the signal to inverted (low voltage is logic 1).
System Commands
198