Integrator's Reference Manual for Polycom HDX Systems
rs232 baud, rs232port1 baud
The rs232 baud command sets or gets the baud rate for the first RS-232 port.
For systems with two serial ports, use rs232port1 baud to set the rate for the second serial port.
Syntax
rs232 baud <get|9600|14400|19200|38400|57600|115200>
rs232port1 baud <get|9600|14400|19200|38400|57600|115200>
Parameter
get
9600|14400|19200|
38400|57600|115200
Feedback Examples
● rs232 baud 9600
returns
rs232 baud 9600
● rs232 baud get
returns
rs232 baud 9600
● rs232port1 baud 14400
returns
rs232port1 baud 14400
● rs232port1 baud get
returns
rs232port1 baud 14400
Polycom, Inc.
Description
Returns the current baud rate setting.
Sets the RS-232 port to this baud rate.
System Commands
401