Subnetmask - Polycom HDX 9006 Integrator's Manual

Integrator's Reference Manual for Polycom HDX Systems

subnetmask

Sets or gets the subnet mask of the system.
Syntax
subnetmask get
subnetmask set ["xxx.xxx.xxx.xxx"]
Parameter
get
set
"xxx.xxx.xxx.xxx"
Feedback Examples
● subnetmask set 255.255.255.0
returns
subnetmask 255.255.255.0
● subnetmask get
returns
subnetmask 255.255.255.0
Comments
After making a change, you must restart the system for the setting to take effect.
Polycom, Inc.
Description
Returns the current subnet mask.
Sets the subnet mask of the system when followed by
the "xxx.xxx.xxx.xxx" parameter. To erase the
current setting, omit "xxx.xxx.xxx.xxx". This
paramater is not allowed while in a call.
Subnet mask of the system.
System Commands
432