Table of Contents
Advertisement
Integrator's Reference Manual for Polycom HDX Systems
systemsetting dviresolution3
Specifies the resolution for the Monitor 4 DVI signal.
Syntax
systemsetting dviresolution3
<60HZ800x600|72HZ800x600|75HZ800x600|60HZ1024x768|70HZ1024x768|75HZ1024x768
|50HZ1280x720|60HZ1280x720|60HZ1280x1024>
systemsetting get dviresolution3
Parameter
60HZ800x600
72HZ800x600
75HZ800x600
60HZ1024x768
70HZ1024x768
75HZ1024x768
550HZ1280x720
60HZ1280x720
60HZ1280x1024
get
Feedback Examples
● systemsetting dviresolution3 60HZ800x600
returns
systemsetting dviresolution3 60HZ800x600
● systemsetting get dviresolution3
returns
systemsettings dviresolution3 60HZ800x600
Comments
This command only sets the resolution for DVI; it does not change the signal type. Use the
monitor4screensaveroutput
This command is valid on Polycom 9004 systems only.
Polycom, Inc.
Description
Sets Monitor 4 resolution to 800x600 at 60 Hertz.
Sets Monitor 4 resolution to 800x600 at 72 Hertz.
Sets Monitor 4 resolution to 800x600 at 75 Hertz.
Sets Monitor 4 resolution to 1024 x 768 at 60 Hertz.
Sets Monitor 4 resolution to 1024 x 768 at 70 Hertz.
Sets Monitor 4 resolution to 1024 x 768 at 75 Hertz.
Sets Monitor 4 resolution to 1280 x 720 at 50 Hertz (PAL
systems only).
Sets Monitor 4 resolution to 1280 x 720 at 60 Hertz
(NTSC systems only)
Sets Monitor 4 resolution to 1280 x 1024 at 60 Hertz.
Returns the current setting.
command on page
497
to change the signal type.
System Commands
systemsetting
473
Advertisement
Table of Contents
