Table of Contents
Advertisement
Integrator's Reference Manual for Polycom HDX Systems
Parameter
up
volume-
volume+
zoom-
zoom+
Feedback Examples
● button up
sends the up arrow command to the user interface and returns
button up
● button near left right call
is valid, sends the near, left arrow, right arrow, and call commands to the user interface, and returns
button near
button left
button right
button call
● button mmstop
returns
button mmstop
● button mmplay
returns
button mmplay
The command checks for invalid input and reports button responses as they are processed. One of three
status values is returned when the command is issued for multiple buttons:
● succeeded—all buttons are valid
● failed—all input is invalid and none can perform a valid action
● completed—some are invalid, and responses specify each as valid or invalid
For example:
● button camera right center select
returns
button camera
button right
error: button center not a recognized command
button select
button completed
Long button command sequences will complete before a second command is considered. Feedback for
button command sequences that include multiple buttons show only the first button name.
Comments
Several parameters can be combined in the same command in any order.
Use the camera command for camera control. Do not use the following commands for camera control:
Polycom, Inc.
Description
Sends the up arrow button signal to the user interface.
Sends the volume - button signal to the user interface.
Sends the volume + button signal to the user interface.
Sends the zoom - button signal to the user interface.
Sends the zoom +button signal to the user interface.
System Commands
152
Advertisement
Table of Contents
