Integrator's Reference Manual for Polycom HDX Systems
ldapserveraddress
Sets or gets the LDAP server address.
Syntax
ldapserveraddress get
ldapserveraddress set ["address"]
Parameter
get
set
"address"
Feedback Examples
● ldapserveraddress get
returns
ldapserveraddress hardware.domain.polycom.com
● ldapserveraddress set software.domain.polycom.com
returns
ldapserveraddress software.domain.polycom.com
Polycom, Inc.
Description
Returns the current setting.
Sets the IP address or the DNS name of an LDAP
server. To erase the current setting, omit the "address"
parameter.
Note: This parameter does not change the setting on the
server. Instead, this parameter changes how the
Polycom system recognizes the server.
Specifies the IP address or the DNS name of an LDAP
server.
The DNS name requires alphanumeric characters. Valid
characters include:
0 through 9
a through z
A through Z
-
Note: The "-" character cannot be used as the first or
last character in the DNS name.
System Commands
330