Dns - Polycom HDX 9006 Integrator's Manual

Integrator's Reference Manual for Polycom HDX Systems

dns

Sets or gets the configuration for up to four DNS servers.
Syntax
dns get {1..4}
dns set {1..4} "xxx.xxx.xxx.xxx"
Parameter
get
{1..4}
set
"xxx.xxx.xxx.xxx"
Feedback Examples
● dns set 1 192.168.1.205
returns
dns 1 192.168.1.205
Comments
After making a change, you must restart the system for the setting to take effect. These values cannot be
set if the system is in DHCP client mode.
Polycom, Inc.
Description
Returns the current IP address of the specified server.
A server identification number {1..4} is required.
Specifies the server identification number.
Sets the IP address of the specified DNS server when
followed by the "xxx.xxx.xxx.xxx" parameter.
A server identification number {1..4} is required.
Specifies the IP address for the specified server.
System Commands
216