Table of Contents
Advertisement
Integrator's Reference Manual for Polycom HDX Systems
preset
Sets the presets or goes (moves) to the presets for the near or far camera source. Also registers or
unregisters the API session to give notification when the user sets or goes to presets.
Syntax
preset <register|unregister>
preset register get
preset far <go|set> <{0..15}>
preset near <go|set> <{0..99}>
Parameter
register
unregister
far
go
set
{0..15}, {0..99}
near
Feedback Examples
● preset register
returns
preset registered
● preset near go 1
returns
preset near go 1
and moves the near-site camera to the preset 1 position
● preset near set 2
returns
preset near set 2
and saves the current location/position of the near-site camera as preset 2
Comments
Up to 100 preset camera positions can be set. These camera presets can be distributed across the far
camera and up to four near-site cameras.
Polycom, Inc.
Description
Registers the system to give notification when the user or
far site sets or goes to a preset. Returns the current preset
registration state when followed by the get parameter.
Disables register mode.
Specifies the far camera. Requires a set or go parameter
and a preset identifier.
Moves the camera to a camera preset. Requires a
"preset" parameter.
Sets a camera preset. Requires a "preset" parameter.
Camera preset identifier. Must be an integer in the range
{0..15} for a far-site camera or {0..99} for a near-site
camera.
Specifies the near camera. Requires a set or go
parameter and a preset identifier.
System Commands
379
Advertisement
Table of Contents
