Bri1Enable, Bri2Enable, Bri3Enable, Bri4Enable - Polycom HDX 9006 Integrator's Manual

Integrator's Reference Manual for Polycom HDX Systems

bri1enable, bri2enable, bri3enable, bri4enable

Sets or gets the configuration of the specified ISDN BRI line. This command is only applicable if you have
a BRI network interface connected to your system.
Syntax
bri1enable <get|yes|no>
bri2enable <get|yes|no>
bri3enable <get|yes|no>
bri4enable <get|yes|no>
Parameter
get
yes
no
Feedback Examples
● bri1enable yes
returns
bri1enable yes
● bri1enable no
returns
bri1enable no
● bri1enable get
returns
bri1enable no
Polycom, Inc.
Description
Returns the status of the BRI line—yes if enabled, no if
disabled.
Enables the BRI line.
Disables the BRI line.
System Commands
148