Table of Contents
Advertisement
Integrator's Reference Manual for Polycom HDX Systems
dcdfilter
Sets or gets the filter setting of the DCD serial interface control signal (data carrier detect). This command
is only applicable if you have a V.35 network interface connected to your system.
Syntax
dcdfilter <get|on|off>
Parameter
get
on
off
Feedback Examples
● dcdfilter on
returns
dcdfilter on
● dcdfilter off
returns
dcdfilter off
● dcdfilter get
returns
dcdfilter off
Comments
When this filter is enabled, DCD drops for 60 seconds before changing the call state. The default setting for
this signal is "off".
Polycom, Inc.
Description
Returns the current setting.
Enables the DCD filter.
Disables the DCD filter.
System Commands
199
Advertisement
Table of Contents
