Camera - Polycom HDX 9006 Integrator's Manual

Integrator's Reference Manual for Polycom HDX Systems

camera

Sets or gets the near-site or far-site camera settings.
Syntax
camera near {1..4}
camera far {1..4}
camera <near|far> move <left|right|up|down|zoom+|zoom-|stop>
camera <near|far> move <continuous|discrete>
camera <near|far> source
camera <near|far> stop
camera near <getposition|setposition "x" "y" "z">
camera near ppcip
camera near tracking statistics
camera near tracking <get|on|off>
camera for-people {2..4}
camera for-content {2..4}
camera list-content
camera <register|unregister>
camera register get
Parameter
near
far
{2..4}
move
left
right
up
down
zoom+
zoom-
Polycom, Inc.
Description
Specifies that the command selects or controls the near
camera.
Specifies that the command selects or controls the far
camera.
Specifies a near or far camera as the main video source.
camera near 6 selects Polycom People+Content™ IP
if it is running and connected to the system.
Changes the near or far camera's direction or zoom.
Only continuous and discrete return feedback.
Valid directions are: left, right, up, down, zoom+, zoom-,
stop, continuous, and discrete.
Starts moving the camera left.
Starts moving the camera right.
Starts moving the camera up.
Starts moving the camera down.
Starts zooming in.
Starts zooming out.
System Commands
173