Dialchannels - Polycom HDX 9006 Integrator's Manual

Integrator's Reference Manual for Polycom HDX Systems

dialchannels

Sets or gets whether to dial ISDN channels in parallel. This command is only applicable if you have an ISDN
network interface connected to your system.
Syntax
dialchannels get
dialchannels set n
Parameter
get
set
n
Feedback Examples
● dialchannels set 8
returns
dialchannels 8
● dialchannels get
returns
dialchannels 8
Polycom, Inc.
Description
Returns the current setting.
Sets the number of channels to dial.
Sets the number of channels to dial. n is 8 for QBRI, 12
for PRI.
System Commands
206