Table of Contents
Advertisement
Integrator's Reference Manual for Polycom HDX Systems
v35prefix
Sets or gets the V.35 dialing prefix. It assumes that a profile has already been selected.
Syntax
v35prefix get "valid speed"
v35prefix set "valid speed" ["value"]
Parameter
get
set
"valid speed"
"value"
Feedback Examples
● v35prefix set 56
returns
v35prefix 56 <empty>
● v35prefix set 112 "#005"
returns
v35prefix 112 "#005"
and associates the dialing prefix 005 with the speed 112
● v35prefix get 112
returns
v35prefix 112 "#005"
See Also
See the
v35profile
command on page 551.
Polycom, Inc.
Description
Returns the current setting for "valid speed".
Sets the V.35/RS-449/RS-530 prefix when followed by a
"value" parameter. To erase the current setting, omit
the "value" parameter.
Valid speeds are 56, 64, 2x56, 112, 2x64, 128, 168, 192,
224, 256, 280, 320, 336, 384, 392, 7x64, 504, 512, 560,
576, 616, 640, 672, 704, 728, 768, 784, 832, 840,
14x64, 952, 960, 1008, 1024, 1064, 1088, 1120, 1152,
1176, 1216, 1232, 1280, 1288, 21x64, 1400, 1408,
1456, 1472, 1512, 1536, 1568, 1600, 1624, 1664, 1680,
1728, 28x64, 1856, 1920, all.
The parameter "all" lists all the available speeds and
their associated dialing prefixes.
V.35/RS-449/RS-530 prefix, which is a function of your
DCE. Consult the DCE user guide for information.
System Commands
550
Advertisement
Table of Contents
