Ntpsecondaryserver - Polycom HDX 9006 Integrator's Manual

Integrator's Reference Manual for Polycom HDX Systems

ntpsecondaryserver

Sets or gets a secondary Network Time Protocol (NTP) server using the IP address or DNS name of the
server.
Syntax
ntpsecondaryserver get
ntpsecondaryserver set ["xxx.xxx.xxx.xxx"|"server name"]
Parameter
get
set
"xxx.xxx.xxx.xxx"
"server name"
Feedback Examples
● ntpsecondaryserver set
returns
ntpsecondaryserver <empty>
● ntpsecondaryserver set 172.26.44.22
returns
ntpsecondaryserver 172.26.44.22
● ntpsecondaryserver get
returns
ntpsecondaryserver 172.26.44.22
Comments
The primary NTP server must be configured in order to configure the secondary NTP server
See Also
See the ntpserver command on page 365.
Polycom, Inc.
Description
Gets the IP address of the secondary NTP server.
Sets the IP address of the secondary NTP server when
followed by a valid parameter. To erase the current
setting, omit the ["xxx.xxx.xxx.xxx"|"server
name"] parameter.
The IP address of the secondary NTP server.
The DNS name of the secondary NTP server
System Commands
364