Mpmode - Polycom HDX 9006 Integrator's Manual

Integrator's Reference Manual for Polycom HDX Systems

mpmode

Sets or gets the multipoint conference viewing mode for the system in a multipoint call. The multipoint mode
can be set to auto, discussion, presentation, or fullscreen. By default, it is set to auto.
Syntax
mpmode <get|auto|discussion|presentation|fullscreen>
Parameter
get
auto
presentation
discussion
fullscreen
Feedback Examples
● mpmode auto
returns
mpmode auto
● mpmode discussion
returns
mpmode discussion
● mpmode get
returns
mpmode discussion
Comments
This option is not available unless the multipoint option is enabled.
What you see during a multipoint call can depend on many factors such as the system's monitor
configuration, the number of sites in the call, whether content is shared, and whether dual monitor emulation
is used.
Polycom, Inc.
Description
Returns the current setting.
In Auto mode, the system switches between Full Screen
Mode and Discussion mode, depending on the
interaction between the sites. If one site is talking
uninterrupted for 15 seconds or more, the speaker
appears full screen.
In Presentation mode, the person who is speaking
appears full screen to the far sites, while the person who
is speaking sees all the other sites on a split screen.
In Discussion mode (also called Continuous Presence
mode), every site sees all the sites in the meeting at the
same time, on a split screen.
In Full Screen mode, every site in the call sees the
current speaker, or the latest person to speak, on the full
screen.
System Commands
350