Table of Contents
Advertisement
Integrator's Reference Manual for Polycom HDX Systems
Parameter
letter
range
"start_no"
"stop_no"
grouplist
size
range_start
range_end
Polycom, Inc.
Description
Returns entries beginning with the letter specified from
the range {a..z}. Requires one or two alphanumeric
characters. Valid characters are:
- _ / ; @ , . \
0 through 9
a through z
Polycom HDX systems search on the Display Name.
Individual words within the Display Name, or GDS
Guestbook, are determined through the use of
delimiters. Supported delimiter characters are:
" ~`!@#$%^&*()-_=+[]{}\\|;:'\",.<>/?".
Spaces are considered a delimiter. For example, if the
user Display Name or Guestbook entry is Adam Smith,
Smith,Adam is returned when a user searches for A or
S, because the space between Adam and Smith is
acting as the delimiter.
Returns global directory entries numbered "start_no"
through "stop_no". Requires two integers.
Specifies the beginning of the range of entries to return.
Specifies the end of the range of entries to return.
Returns a list of group names in this format:
gaddrbook grouplist {0..n}.
group:"group_name"
...
gaddrbook grouplist done
Returns the size of the result set that will be returned by
the command. The size parameter can be used with the
grouplist, group, and names search commands.
The response is in the following format:
gaddrbook <command> size {0..n}
For the grouplist, group, and names search commands,
specifies the beginning of the range of entries to return.
For the grouplist, group, and names search commands,
specifies the end of the range of entries to return. If a
range_start is specified without a range_end, then the
single range_start entry will be returned. If range_end is
-1, all entries starting with range_start will be returned.
Note that the LDAP server will limit the maximum
number of entries that may be returned.
System Commands
250
Advertisement
Table of Contents
