Table of Contents
Advertisement
Integrator's Reference Manual for Polycom HDX Systems
configdisplay
Sets or gets the video format, aspect ratio and resolution for Monitor 1 or Monitor 2.
Syntax
configdisplay [<monitor1|monitor2>] get
configdisplay <monitor1|monitor2> <component|vga|dvi|composite|s_video> <4:3|16:9>
configdisplay <monitor1|monitor2> <component|vga|dvi|composite|s_video> <4:3|16:9>
[<720p|1080i|1080p>] [<50hz720p|60hz720p|50hz1080i|60hz1080i|50hz1080p|60hz1080p>]
configdisplay monitor2 off
Parameter
get
monitor1
monitor2
s_video
composite
vga
dvi
component
hdmi
4:3
16:9
720p
1080i
1080p
50hz720p
Polycom, Inc.
Description
Returns the current setting.
Specifies Monitor 1.
Specifies Monitor 2.
Sets the specified display to S-Video format.
Sets the specified display to Composite format.
Sets the specified display to VGA format.
Sets the specified display to DVI format.
Sets the specified display to Component format.
Sets the specified display to HDMI format.
Sets the display aspect ratio to 4:3 (standard).
Sets the display aspect ratio to 16:9 (wide screen).
Sets the resolution to 1280x720p, 50-60 Hz (refresh rate
determined by whether unit is PAL or NTSC,
respectively). For monitors with Component format and
16:9 aspect ratio only.
Sets the resolution to 1920x1080i, 50-60 Hz (refresh
rate determined by whether unit is PAL or NTSC,
respectively). For monitors with Component format and
16:9 aspect ratio only.
Sets the resolution to 1920x1080p, 50-60 Hz (refresh
rate determined by whether unit is PAL or NTSC,
respectively). For monitors with Component format and
16:9 aspect ratio only.
Sets the resolution to 1280x720p, 50 Hz (PAL
systems-only). For monitors with Component format and
16:9 aspect ratio only.
System Commands
185
Advertisement
Table of Contents
