Table of Contents
Advertisement
Integrator's Reference Manual for Polycom HDX Systems
contentsplash
Enables or disables the splash screen display on content monitors.
Syntax
contentsplash <get|yes|no>
Parameter
get
yes
no
Feedback Examples
● contentsplash get
returns
contentsplash yes
● contentsplash yes
returns
contentsplash yes
● contentsplash no
returns
contentsplash no
Comments
The splash screen displays a Polycom logo on content-only displays when neither the near end nor the far
end is sending content, and when the Polycom HDX system is not in sleep mode.
By default, the content splash value is set to yes.
When the content splash value is set to no, black video or no signal is sent to the monitor, depending on the
screen saver output configured for the monitor.
The content splash setting is persistent across the power cycle.
See Also
See the
monitor1screensaveroutput
page 348.
Polycom, Inc.
Description
Returns the current setting.
Turns on the content splash screen.
Turns off the content splash screen.
command on page
346
and
monitor2screensaveroutput
System Commands
command on
193
Advertisement
Table of Contents
