Cts - Polycom HDX 9006 Integrator's Manual

Integrator's Reference Manual for Polycom HDX Systems

cts

Sets or gets the CTS serial interface control signal (clear to send) configuration. This command is only
applicable if you have a V.35 network interface connected to your system.
Syntax
cts <get|normal|inverted|ignore>
Parameter
get
normal
inverted
ignore
Feedback Examples
● cts normal
returns
cts normal
● cts inverted
returns
cts inverted
● cts get
returns
cts inverted
Comments
The default setting for this signal is "normal".
Polycom, Inc.
Description
Returns the current setting.
Sets the signal to normal (high voltage is logic 1).
Sets the signal to inverted (low voltage is logic 1).
Ignores the signal.
System Commands
196