Integrator's Reference Manual for Polycom HDX Systems
isdncountrycode
Sets or gets the ISDN country code associated with the country where the system is used. This command
is only applicable if you have an ISDN network interface connected to your system.
Syntax
isdncountrycode get
isdncountrycode set ["country code"]
Parameter
get
set
"country code"
Feedback Examples
● isdncountrycode set 1
returns
isdncountrycode 1
● isdncountrycode get
returns
isdncountrycode 1
Comments
The system is generally able to automatically determine the country code based on the country you selected
during initial system setup.
Polycom, Inc.
Description
Returns the country code information.
Sets the ISDN country code when followed by the
"country code" parameter. To erase the current
setting, omit "country code".
The ISDN country code.
System Commands
316