Table of Contents
Advertisement
Integrator's Reference Manual for Polycom HDX Systems
dial
Dials video or audio calls either manually or from the directory.
Syntax
dial addressbook "addr book name"
dial auto "speed" "dialstr"dial manual <56|64> "dialstr1" "dialstr2" [h320]
dial manual "speed" "dialstr1" ["dialstr2"] [h323|h320|ip|isdn|sip]
dial phone "dialstring"
dial phone <pots|isdn_phone|sip_speakerphone> "dialstring"
Parameter
addressbook
"addr book name"
auto
"speed"
"dialstr",
"dialstr1",
"dialstr2"
manual
56|64
h323|h320|ip|isdn|s
ip
phone
Polycom, Inc.
Description
Dials a directory (address book) entry. Requires the
name of the entry.
The name of the directory (address book) entry. The
name may be up to 25 characters. Use quotation marks
around strings that contain spaces. For example:
"John Doe".
Dials a video call number dialstr1 at speed of type h323
or h320. Requires the parameters "speed" and "dialstr".
Allows the user to automatically dial a number. The
system first attempts H.323 and if that fails, rolls over to
H.320. Deprecated. Instead of this command, Polycom
recommends using dial manual and not specifying a
call type.
Valid data rate for the network.
Valid ISDN or IP directory number.
Dials a video call number dialstr1 at speed of type h323
or h320. Requires the parameters "speed" and "dialstr1".
Use dial manual "speed" "dialstr" "type"
when you do not want automatic call rollover or when
the dialstring might not convey the intended transport
(for example, an extension with an IP gateway might
look like an ISDN number, but in fact corresponds to an
IP address).
Specifies speed for two-channel calls.
Type of call.
Note: The parameters ip and isdn are deprecated.
Dials an analog phone number.
System Commands
203
Advertisement
Table of Contents
