Table of Contents
Advertisement
Integrator's Reference Manual for Polycom HDX Systems
systemsetting componentresolution
Specifies the component output resolution of Monitor 1.
Syntax
systemsetting componentresolution <720p|1080i|1080p>
systemsetting get componentresolution
Parameter
<720p|1080i|1080p>
get
Feedback Examples
● systemsetting componentresolution 720p
returns
systemsetting componentresolution 720p
● systemsetting get componentresolution
returns
systemsetting componentresolution 720p
Comments
This command sets the output resolution for Monitor 1 if configured for component output.
This command is not supported on HDX 6000 systems.
Polycom, Inc.
Description
Specifies the component output resolution of Monitor 1.
Choices are:
720p--720P HD Video.
•
1080i--1080i HD Video (not supported on HDX
•
9001, 9002, or 9004 systems.)
1080p--1080p HD Video (not supported on HDX
•
9001, 9002, or 9004 systems.)
Returns the current setting.
System Commands
454
Advertisement
Table of Contents
