Table of Contents
Advertisement
Integrator's Reference Manual for Polycom HDX Systems
diffservaudio, diffservfecc, diffservvideo
Sets or gets the DiffServ option and specifies a priority level for audio, far-end camera control (FECC) and
other call control channels, and video, respectively. The priority level value for each can be between 0 and
63.
Syntax
diffservaudio get
diffservaudio set {0..63}
diffservfecc get
diffservfecc set {0..63}
diffservvideo get
diffservvideo set {0..63}
Parameter
get
set
{0..63}
Feedback Examples
● diffservaudio set 2
returns
diffservaudio 2
● diffservaudio get
returns
diffservaudio 2
Comments
The diffservfecc command is equivalent to the Control setting in the user interface.
If the
typeofservice
command on page
commands are not applicable.
Polycom, Inc.
Description
Returns the current setting.
Sets the command. A priority level in the range
{0..63} is required.
Specifies the priority level.
is set to ip-precedence rather than to diffserv, these
538
System Commands
207
Advertisement
Table of Contents
