Mixed Mode Configuration Commands - Alcatel-Lucent 7450 Basic System Configuration Manual

view
Syntax view {bootup-cfg | active-cfg | candidate-cfg | latest-rb| checkpoint-id | rescue}
Context <root>
Description
The context to configure administrative system viewing parameters. Only authorized users can execute
the commands in the admin context.
Default
none
Parameters
bootup-cfg — Specifies the bootup configuration.
active-cfg — Specifies current running configuration.
candidate-cfg — Specifies candidate configuration.
latest-rb — Specifies the latest configuration.
checkpoint-id — Specifies a specific checkpoint file configuration.
rescue — Specifies a rescue checkpoint configuration.

Mixed Mode Configuration Commands

capability
Syntax capability {sr | ess} [now]
Context config>card
Description
This command sets the desired capability for the associated slot and card. The capability is used along
with mixed-mode to enable additional features on certain cards and slots.
By default, the capability will be set to that of the base chassis type. To set this to a non-default value,
the mixed-mode command must be enabled at the system level.
Changing the capability of a slot or card will result in the associated slot being reset. The card-type
must first be configured before the capability command can be issued.
Default
capability ess on a 7450 ESS chassis
Basic System Configuration Guide
cflash-id
Values
1 to 9
interface - 32 chars max, for link local addresses
cf1:|cf1-A:|cf1-B:|cf2:|cf2-A:|cf2-B:|cf3:|cf3-A:|cf3-B:
System Management
415