Standards And Protocol Support - Alcatel-Lucent 7450 Basic System Configuration Manual

Ethernet service switch /service router /extensible routing system
Hide thumbs Also See for 7450:
Table of Contents

Advertisement

Standards and Protocol Support

ANCP/L2CP
draft-ietf-ancp-protocol-02, Protocol for Access Node Control Mechanism in Broadband
RFC 5851, Framework and Requirements for an Access Node Control Mechanism in
ATM
AF-ILMI-0065.000, Integrated Local Management Interface (ILMI) Version 4.0
AF-PHY-0086.001, Inverse Multiplexing for ATM (IMA) Specification Version 1.1
AF-TM-0121.000, Traffic Management Specification Version 4.1
AF-TM-0150.00, Addendum to Traffic Management v4.1 optional minimum desired cell rate
GR-1113-CORE, Asynchronous Transfer Mode (ATM) and ATM Adaptation Layer (AAL)
GR-1248-CORE, Generic Requirements for Operations of ATM Network Elements (NEs),
ITU-T I.432.1, B-ISDN user-network interface - Physical layer specification: General
ITU-T I.610, B-ISDN operation and maintenance principles and functions (11/95)
RFC 1626, Default IP MTU for use over ATM AAL5
RFC 2684, Multiprotocol Encapsulation over ATM Adaptation Layer 5
BGP
draft-hares-idr-update-attrib-low-bits-fix-01, Update Attribute Flag Low Bits Clarification
draft-ietf-idr-add-paths-04, Advertisement of Multiple Paths in BGP
draft-ietf-idr-best-external-03, Advertisement of the best external route in BGP
Basic System Configuration Guide
Note: The information presented is subject to change without notice.
Alcatel-Lucent assumes no responsibility for inaccuracies contained herein.
Networks
Broadband Multi-Service Networks
indication for UBR
Protocols Generic Requirements, Issue 1
Issue 3
characteristics (02/99)
557

Advertisement

Table of Contents
loading

This manual is also suitable for:

77507950

Table of Contents