Alcatel-Lucent 7450 Basic System Configuration Manual page 218

Ethernet service switch /service router /extensible routing system
Hide thumbs Also See for 7450:
Table of Contents

Advertisement

BOF Configuration Command Reference
The no form of the command removes the tertiary-config configuration.
Default
none
Parameters
file-url — The tertiary configuration file location, expressed as a file URL.
tertiary-image
Syntax
tertiary-image file-url
no tertiary-image
Context
bof
Description
This command specifies the tertiary directory location for runtime image file loading.
The system attempts to load all runtime image files configured in the primary-image first. If this fails,
the system attempts to load the runtime images from the location configured in the secondary-image.
If the secondary image load fails, the tertiary image specified in tertiary-image is used.
All runtime image files (*.tim files) must be located in the same directory.
The no form of the command removes the tertiary-image configuration.
Default
none
Parameters
file-url — The location-url can be either local (this CPM) or a remote FTP server.
218
Values
file-url
[local-url | remote-url] (up to 180 characters)
local-url
[cflash-id/][file-path]
remote-url
[{ftp://|tftp://} login:pswd@remote-locn/][file-path]
cflash-id
cf1:, cf1-A:, cf1-B:, cf2:, cf2-A:, cf2-B:, cf3:, cf3-A:, cf3-B:
Values
file-url
[local-url | remote-url] (up to 180 characters)
local-url
[cflash-id/][file-path]
remote-url
[{ftp://|tftp://} login:pswd@remote-locn/][file-path]
cflash-id
cf1:, cf1-A:, cf1-B:, cf2:, cf2-A:, cf2-B:, cf3:, cf3-A:, cf3-B:
Basic System Configuration Guide

Advertisement

Table of Contents
loading

This manual is also suitable for:

77507950

Table of Contents